products
  • 6/30kv Single-Three-Core AL/CU Conductor XLPE Insulated Copper Tape screened Steel Tape armoured PVC Sheathed Power Cable(N2XSEBY,NA2XSEBY)
  • 6/30kv Single-Three-Core AL/CU Conductor XLPE Insulated Copper Tape screened PVC Sheathed Power Cable(N2XSY,NA2XSY)

6/30KV 1, 3Core CU(AL)/XLPE/CTS/STA/PVC Power Cable(N2XSEBY,NA2XSEBY)

Aluminum or Copper Conductor, XLPE insulated, Copper Tape screened, Steel Tape Armoured,PVC sheathed; Voltage:3.6/6kv,6/10kv,8.7/15kv,12/20kv,18/30kv; Standard: IEC60502-2, BS, ICEA, AS/NZS, VDE and other standards.

We're here to help:Easy ways to get the answers you need.

  • Description
  • Parameter
Application:
1.The max. rated temp. of the cable’s conductor is 90˚C.
2.Max. short circuit temp. of the cable’s conductor shall not exceed 250˚C. (max. duration not exceed 5s)
3.For easily to choose cable, the system is divided into three categories:
A category: Any phase can separate from the system in 1 minute when earthing or earthing conductor.
B category: when the single-phase is earthed can be operated short-time according to the provision of IEC 60183, the fault duration does not exceed 1 hour for cable in line with the standards, the earth fault duration is longer and does not exceed 8 hours under any circumstance, the accumulated time shall not exceed 125 hours each year.
C category: which does not belong to A or B category.
The values of U 0 recommended for cables to be used in three-phase systems are listed in
Table 1.
4. The ambient temp. shall not be lower than 0℃ during laying. Refer to Table 2 about the minimum bending radius:
Table 1

Highest system voltage (U m) /kV

Rated voltage (U 0) /kV

Categories A and B

Category C

7.2

3.6

6.0

12.0

6.0

8.7

17.5

8.7

12.0

24.0

12.0

18.0

36.0

18.0

_


Table 2

Items

Single-core Cables

Three-core Cables

Unarmored

Armored

Unarmored

Armored

Min. bending radius during installation

20D

15D

15D

12D

Min. bending radius close to connection box and termination (bending radius should be controlled carefully, if the molding guide plate is used)

15D

12D

12D

10D


 
Construction :
Single / Three Core:
1.Aluminum Conductor or copper conductor
2.Conductor screen
3.XLPE insulation
4.Insulation screen
5.Copper tape screen
6.Steel Tape armoured
7.PVC or PE outer sheath


Specifications:
The cables are manufactured according to IEC60502-2, BS, ICEA, AS/NZS, VDE and other standards.
 
YJV62/YJLV62 1 CORE 3.6/6KV      N2XSEBY,NA2XSEBY
Nominal cross 
sectional area
Insulation 
thickness
Copper tape
 thickness
Galvanized Steel 
Tape Thickness
Sheath 
hickness
Approximate 
outer diameter
Approx.weight 
kg/km
Max. DC Resistance
 at 20℃ Ω/km
mm2 mm mm mm mm mm CU AL CU AL
1X10 2.5 0.12 0.2 1.8 19.4 574 512 1.83 3.08
1X16 2.5 0.12 0.2 1.8 20.2 657 559 1.15 1.91
1X25 2.5 0.12 0.2 1.8 21.4 782 628 0.727 1.20
1X35 2.5 0.12 0.2 1.8 22.4 905 692 0.524 0.868
1X50 2.5 0.12 0.2 1.8 23.5 1060 770 0.387 0.641
1X70 2.5 0.12 0.2 1.8 25.2 1304 888 0.268 0.443
1X95 2.5 0.12 0.2 1.8 27 1604 1026 0.193 0.320
1X120 2.5 0.12 0.2 1.8 28.4 1882 1150 0.153 0.253
1X150 2.5 0.12 0.2 1.9 29.9 2186 1279 0.124 0.206
1X185 2.5 0.12 0.2 1.9 31.8 2588 1457 0.0991 0.164
1X240 2.6 0.12 0.2 2.0 34.5 3197 1731 0.0754 0.125
1X300 2.8 0.12 0.5 2.1 38.5 4243 2391 0.0601 0.100
1X400 3.0 0.12 0.5 2.3 42.0 5259 2849 0.0470 0.0778
1X500 3.2 0.12 0.5 2.4 45.7 6356 3356 0.0366 0.0605
1X630 3.2 0.12 0.5 2.5 49.8 7871 3979 0.0283 0.0469
YJV22/YJLV22 3 CORE 3.6/6KV     N2XSEBY,NA2XSEBY
Nominal cross 
sectional area
Insulation 
thickness
Copper tape
 thickness
Galvanized Steel
 Tape Thickness
Sheath
 thickness
Approximate 
outer diameter
Approx.weight 
kg/km
Max. DC Resistance
 at 20℃ Ω/km
mm2 mm mm mm mm mm CU AL CU AL
3X10 2.5 0.1 0.2 2.0 34.1 1428 1241 1.83 3.08
3X16 2.5 0.1 0.5 2.1 37.2 2031 1735 1.15 1.91
3X25 2.5 0.1 0.5 2.2 40.0 2432 1968 0.727 1.20
3X35 2.5 0.1 0.5 2.3 42.6 2853 2212 0.524 0.868
3X50 2.5 0.1 0.5 2.4 45.2 3433 2559 0.387 0.641
3X70 2.5 0.1 0.5 2.5 49.2 4235 2982 0.268 0.443
3X95 2.5 0.1 0.5 2.6 53.3 5247 3505 0.193 0.320
3X120 2.5 0.1 0.5 2.8 56.5 6144 3938 0.153 0.253
3X150 2.5 0.1 0.5 2.9 60.2 7188 4455 0.124 0.206
3X185 2.5 0.1 0.5 3.0 64.0 8414 5006 0.0991 0.164
3X240 2.6 0.1 0.5 3.2 70.0 10439 6018 0.0754 0.125
3X300 2.8 0.1 0.5 3.4 76.2 12711 7129 0.0601 0.100
3X400 3.0 0.1 0.8 3.7 85.1 16746 9482 0.0470 0.0778
3X500 3.2 0.1 0.8 3.9 93.3 20266 11224 0.0366 0.0605
3X630 3.2 0.1 0.8 4.2 102.3 25108 13377 0.0283 0.0469
YJV62/YJLV62 1 CORE 6/10KV     N2XSEBY,NA2XSEBY
Nominal cross
 sectional area
Insulation
 thickness
Copper tape
 thickness
Galvanized Steel 
Tape Thickness
Sheath
 thickness
Approximate
 outer diameter
Approx.weight 
kg/km
Max. DC Resistance
 at 20℃ Ω/km
mm2 mm mm mm mm mm CU AL CU AL
1X16 3.4 0.12 0.2 1.8 22.2 751 653 1.15 1.91
1X25 3.4 0.12 0.2 1.8 23.4 879 725 0.727 1.20
1X35 3.4 0.12 0.2 1.8 24.4 1005 793 0.524 0.868
1X50 3.4 0.12 0.2 1.8 25.5 1163 873 0.387 0.641
1X70 3.4 0.12 0.2 1.8 27.2 1413 997 0.268 0.443
1X95 3.4 0.12 0.2 1.9 29.2 1732 1154 0.193 0.320
1X120 3.4 0.12 0.2 1.9 30.4 2000 1269 0.153 0.253
1X150 3.4 0.12 0.2 2.0 32.1 2324 1418 0.124 0.206
1X185 3.4 0.12 0.2 2.0 33.8 2718 1587 0.0991 0.164
1X240 3.4 0.12 0.5 2.2 37.7 3692 2231 0.0754 0.125
1X300 3.4 0.12 0.5 2.2 39.9 4361 2509 0.0601 0.100
1X400 3.4 0.12 0.5 2.3 43.0 5438 2951 0.0470 0.0778
1X500 3.4 0.12 0.5 2.4 46.3 6415 3415 0.0366 0.0605
1X630 3.2 0.12 0.5 2.6 50.6 7957 4065 0.0283 0.0469
YJV22/YJLV22 3 CORE 6/10KV     N2XSEBY,NA2XSEBY
Nominal cross
 sectional area
Insulation
 thickness
Copper tape
 thickness
Galvanized Steel 
Tape Thickness
Sheath
 thickness
Approximate 
outer diameter
Approx.weight 
kg/km
Max. DC Resistance
 at 20℃ Ω/km
mm2 mm mm mm mm mm CU AL CU AL
3X16 3.4 0.1 0.5 2.3 42.0 2445 2149 1.15 1.91
3X25 3.4 0.1 0.5 2.4 44.9 2887 2424 0.727 1.20
3X35 3.4 0.1 0.5 2.4 47.1 3278 2636 0.524 0.868
3X50 3.4 0.1 0.5 2.6 50.1 3839 2964 0.387 0.641
3X70 3.4 0.1 0.5 2.7 54.2 4727 3473 0.268 0.443
3X95 3.4 0.1 0.5 2.8 58.2 5703 3961 0.193 0.320
3X120 3.4 0.1 0.5 2.9 61.2 6639 4433 0.153 0.253
3X150 3.4 0.1 0.5 3.0 64.7 7624 4891 0.124 0.206
3X185 3.4 0.1 0.5 3.1 68.7 8998 5589 0.0991 0.164
3X240 3.4 0.1 0.5 3.3 74.3 11026 6606 0.0754 0.125
3X300 3.4 0.1 0.5 3.5 79.7 13235 7652 0.0601 0.100
3X400 3.4 0.1 0.8 3.7 87.3 17031 9767 0.0470 0.0778
3X500 3.4 0.1 0.8 4.0 94.8 20495 11454 0.0366 0.0605
3X630 3.4 0.1 0.8 4.2 103.6 25308 13577 0.0283 0.0469
YJV62/YJLV62 1 CORE 8.7/15KV     N2XSEBY,NA2XSEBY
Nominal cross
 sectional area
Insulation
 thickness
Copper tape
 thickness
Galvanized Steel
 Tape Thickness
Sheath 
thickness
Approximate
 outer diameter
Approx.weight 
kg/km
Max. DC Resistance
 at 20℃ Ω/km
mm2 mm mm mm mm mm CU AL CU AL
1X25 4.5 0.12 0.2 1.8 25.6 992 838 0.727 1.20
1X35 4.5 0.12 0.2 1.8 26.6 1122 909 0.524 0.868
1X50 4.5 0.12 0.2 1.9 27.9 1296 1006 0.387 0.641
1X70 4.5 0.12 0.2 1.9 29.6 1551 1136 0.268 0.443
1X95 4.5 0.12 0.2 2.0 31.6 1878 1300 0.193 0.320
1X120 4.5 0.12 0.2 2.0 32.8 2152 1420 0.153 0.253
1X150 4.5 0.12 0.2 2.1 34.5 2482 1575 0.124 0.206
1X185 4.5 0.12 0.5 2.2 37.6 3251 2120 0.0991 0.164
1X240 4.5 0.12 0.5 2.2 39.9 3873 2412 0.0754 0.125
1X300 4.5 0.12 0.5 2.3 42.5 4591 2740 0.0601 0.100
1X400 4.5 0.12 0.5 2.4 45.4 5568 3171 0.0470 0.0778
1X500 4.5 0.12 0.5 2.5 48.9 6674 3675 0.0366 0.0605
1X630 4.5 0.12 0.5 2.6 52.8 8182 4291 0.0283 0.0469
YJV22/YJLV22 3 CORE 8.7/15KV     N2XSEBY,NA2XSEBY
Nominal cross 
sectional area
Insulation 
thickness
Copper tape
 thickness
Galvanized Steel 
Tape Thickness
Sheath 
thickness
Approximate 
outer diameter
Approx.weight 
kg/km
Max. DC Resistance
 at 20℃ Ω/km
mm2 mm mm mm mm mm CU AL CU AL
3X25 4.5 0.1 0.5 2.5 50.1 3300 2837 0.727 1.20
3X35 4.5 0.1 0.5 2.6 52.5 3727 3085 0.524 0.868
3X50 4.5 0.1 0.5 2.7 55.2 4345 3470 0.387 0.641
3X70 4.5 0.1 0.5 2.8 59.3 5198 3944 0.268 0.443
3X95 4.5 0.1 0.5 3.0 63.6 6272 4530 0.193 0.320
3X120 4.5 0.1 0.5 3.1 66.6 7274 5068 0.153 0.253
3X150 4.5 0.1 0.5 3.2 70.0 8281 5548 0.124 0.206
3X185 4.5 0.1 0.5 3.3 74.1 9697 6289 0.0991 0.164
3X240 4.5 0.1 0.5 3.5 79.7 11763 7343 0.0754 0.125
3X300 4.5 0.1 0.8 3.7 86.2 14741 9158 0.0601 0.100
3X400 4.5 0.1 0.8 3.9 92.6 17885 10621 0.0470 0.0778
3X500 4.5 0.1 0.8 4.1 99.9 21383 12346 0.0366 0.0605
3X630 4.5 0.1 0.8 4.4 108.9 26180 14452 0.0283 0.0469
YJV62/YJLV62 1 CORE 12/20KV     N2XSEBY,NA2XSEBY
Nominal cross 
sectional area
Insulation 
thickness
Copper tape
 thickness
Galvanized Steel
 Tape Thickness
Sheath
 thickness
Approximate 
outer diameter
Approx.weight 
kg/km
Max. DC Resistance
 at 20℃ Ω/km
mm2 mm mm mm mm mm CU AL CU AL
1X35 5.5 0.12 0.2 1.9 26.6 1272 1059 0.524 0.868
1X50 5.5 0.12 0.2 1.9 27.9 1439 1149 0.387 0.641
1X70 5.5 0.12 0.2 2.0 29.6 1715 1299 0.268 0.443
1X95 5.5 0.12 0.2 2.0 31.6 2035 1457 0.193 0.320
1X120 5.5 0.12 0.5 2.1 32.8 2673 1942 0.153 0.253
1X150 5.5 0.12 0.5 2.2 34.5 3027 2120 0.124 0.206
1X185 5.5 0.12 0.5 2.2 37.6 3452 2321 0.0991 0.164
1X240 5.5 0.12 0.5 2.3 39.9 4125 2665 0.0754 0.125
1X300 5.5 0.12 0.5 2.4 42.5 4832 2980 0.0601 0.100
1X400 5.5 0.12 0.5 2.5 45.4 5848 3452 0.0470 0.0778
1X500 5.5 0.12 0.5 2.6 48.9 6943 3945 0.0366 0.0605
1X630 5.5 0.12 0.5 2.7 52.8 8498 4608 0.0283 0.0469
YJV22/YJLV22 3 CORE 12/20KV     N2XSEBY,NA2XSEBY
Nominal cross 
sectional area
Insulation
 thickness
Copper tape 
thickness
Galvanized Steel 
Tape Thickness
Sheath 
thickness
Approximate 
outer diameter
Approx.weight 
kg/km
Max. DC Resistance 
at 20℃ Ω/km
mm2 mm mm mm mm mm CU AL CU AL
3X35 5.5 0.1 0.5 2.8 58.2 4317 3676 0.524 0.868
3X50 5.5 0.1 0.5 2.9 61.0 4942 4067 0.387 0.641
3X70 5.5 0.1 0.5 3.0 64.9 5789 4536 0.268 0.443
3X95 5.5 0.1 0.5 3.1 69.2 6944 5202 0.193 0.320
3X120 5.5 0.1 0.5 3.2 72.2 7877 5672 0.153 0.253
3X150 5.5 0.1 0.5 3.3 75.6 9012 6280 0.124 0.206
3X185 5.5 0.1 0.5 3.5 79.9 10388 6979 0.0991 0.164
3X240 5.5 0.1 0.8 3.7 86.6 13338 8917 0.0754 0.125
3X300 5.5 0.1 0.8 3.8 91.8 15618 10036 0.0601 0.100
3X400 5.5 0.1 0.8 4.1 98.4 18882 11618 0.0470 0.0778
3X500 5.5 0.1 0.8 4.3 105.7 22463 13431 0.0366 0.0605
3X630 5.5 0.1 0.8 4.5 114.5 27275 15550 0.0283 0.0469
YJV62/YJLV62 1 CORE 18/30KV     N2XSEBY,NA2XSEBY
Nominal cross 
sectional area
Insulation 
thickness
Copper tape 
thickness
Galvanized Steel
 Tape Thickness
Sheath
 thickness
Approximate 
outer diameter
Approx.weight 
kg/km
Max. DC Resistance
 at 20℃ Ω/km
mm2 mm mm mm mm mm CU AL CU AL
1X50 8.0 0.12 0.5 2.1 55.6 2137 1847 0.387 0.641
1X70 8.0 0.12 0.5 2.2 36.9 2449 2033 0.268 0.443
1X95 8.0 0.12 0.5 2.3 38.8 2822 2244 0.193 0.320
1X120 8.0 0.12 0.5 2.3 40.8 3147 2415 0.153 0.253
1X150 8.0 0.12 0.5 2.4 42.2 3516 2610 0.124 0.206
1X185 8.0 0.12 0.5 2.4 43.9 3956 2826 0.0991 0.164
1X240 8.0 0.12 0.5 2.5 45.6 4656 3197 0.0754 0.125
1X300 8.0 0.12 0.5 2.6 48.3 5384 3533 0.0601 0.100
1X400 8.0 0.12 0.5 2.7 50.7 6430 4035 0.0470 0.0778
1X500 8.0 0.12 0.5 2.8 53.8 7555 4560 0.0366 0.0605
1X630 8.0 0.12 0.5 2.9 57.1 9149 5260 0.0283 0.0469
YJV22/YJLV22 3 CORE 18/30KV     N2XSEBY,NA2XSEBY
Nominal cross
 sectional area
Insulation
 thickness
Copper tape
 thickness
Galvanized Steel 
Tape Thickness
Sheath 
thickness
Approximate 
outer diameter
Approx.weight 
kg/km
Max. DC Resistance
 at 20℃ Ω/km
mm2 mm mm mm mm mm CU AL CU AL
3X50 8.0 0.1 0.5 3.3 73.0 6397 5523 0.387 0.641
3X70 8.0 0.1 0.5 3.4 77.1 7341 6087 0.268 0.443
3X95 8.0 0.1 0.5 3.5 81.2 8532 6790 0.193 0.320
3X120 8.0 0.1 0.8 3.7 85.6 10381 8175 0.153 0.253
3X150 8.0 0.1 0.8 3.8 89.0 11585 8853 0.124 0.206
3X185 8.0 0.1 0.8 3.9 93.1 13028 9619 0.0991 0.164
3X240 8.0 0.1 0.8 4.1 98.6 15288 10868 0.0754 0.125
3X300 8.0 0.1 0.8 4.2 103.8 17704 12121 0.0601 0.100
3X400 8.0 0.1 0.8 4.5 110.4 20947 13683 0.0470 0.0778
3X500 8.0 0.1 0.8 4.7 117.7 24634 15610 0.0366 0.0605
3X630 8.0 0.1 0.8 4.9 126.5 29576 17855 0.0283 0.0469

*Describe Your Buying Requirements in Detail