products
  • 6/30kv Single-Three-Core AL/CU Conductor XLPE Insulated Copper Tape screened Steel Wire armoured PVC Sheathed Power Cable(N2XSB(AL)Y,NA2XSB(AL)Y)
  • 6/30kv Single-Three-Core AL/CU Conductor XLPE Insulated Copper Tape screened Steel Wire armoured PVC Sheathed Power Cable(N2XSB(AL)Y,NA2XSB(AL)Y)

6/30KV 1, 3Core CU(AL)/XLPE/CTS/SWA/PVC Power Cable(N2XSB(AL)Y,NA2XSB(AL)Y)

Aluminum or Copper Conductor, XLPE insulated, Copper Tape screened, Steel Wire Armoured,PVC sheathed; Voltage:3.6/6kv,6/10kv,8.7/15kv,12/20kv,18/30kv; Standard: IEC60502-2, BS, ICEA, AS/NZS, VDE and other standards.

We're here to help:Easy ways to get the answers you need.

  • Description
  • Parameter
Application:
1.The max. rated temp. of the cable’s conductor is 90˚C.
2.Max. short circuit temp. of the cable’s conductor shall not exceed 250˚C. (max. duration not exceed 5s)
3.For easily to choose cable, the system is divided into three categories:
A category: Any phase can separate from the system in 1 minute when earthing or earthing conductor.
B category: when the single-phase is earthed can be operated short-time according to the provision of IEC 60183, the fault duration does not exceed 1 hour for cable in line with the standards, the earth fault duration is longer and does not exceed 8 hours under any circumstance, the accumulated time shall not exceed 125 hours each year.
C category: which does not belong to A or B category.
The values of U 0 recommended for cables to be used in three-phase systems are listed in
Table 1.
4. The ambient temp. shall not be lower than 0℃ during laying. Refer to Table 2 about the minimum bending radius:
Table 1

Highest system voltage (U m) /kV

Rated voltage (U 0) /kV

Categories A and B

Category C

7.2

3.6

6.0

12.0

6.0

8.7

17.5

8.7

12.0

24.0

12.0

18.0

36.0

18.0

_


Table 2

Items

Single-core Cables

Three-core Cables

Unarmored

Armored

Unarmored

Armored

Min. bending radius during installation

20D

15D

15D

12D

Min. bending radius close to connection box and termination (bending radius should be controlled carefully, if the molding guide plate is used)

15D

12D

12D

10D


 
Construction :
Single / Three Core:
1.Aluminum Conductor or copper conductor
2.Conductor screen
3.XLPE insulation
4.Insulation screen
5.Copper tape screen
6.Fine Steel wire armoured
7.PVC or PE outer sheath


Specifications:
The cables are manufactured according to IEC60502-2, BS, ICEA, AS/NZS, VDE and other standards.
 
YJV32/YJLV32 1 CORE 3.6/6KV    N2XSB(AL)Y,NA2XSB(AL)Y
Nominal cross
 sectional area
Insulation 
thickness
Copper tape
 thickness
Amored Aluminum 
Wire Diamater
Sheath 
thickness
Approximate 
outer diameter
Approx.weight 
kg/km
Max. DC Resistance 
at 20℃ Ω/km
mm2 mm mm mm mm mm CU AL CU AL
1X10 2.5 0.12 1.6 1.8 22.4 671 609 1.83 3.08
1X16 2.5 0.12 1.6 1.8 23.2 755 656 1.15 1.91
1X25 2.5 0.12 1.6 1.8 24.4 888 734 0.727 1.20
1X35 2.5 0.12 1.6 1.8 25.4 1017 803 0.524 0.868
1X50 2.5 0.12 1.6 1.8 26.5 1176 885 0.387 0.641
1X70 2.5 0.12 1.6 1.9 28.4 1438 1022 0.268 0.443
1X95 2.5 0.12 1.6 1.9 30.2 1745 1166 0.193 0.320
1X120 2.5 0.12 1.6 2.0 31.6 2034 1302 0.153 0.253
1X150 2.5 0.12 2.0 2.0 33.9 2424 1518 0.124 0.206
1X185 2.5 0.12 2.0 2.1 35.8 2836 1705 0.0991 0.164
1X240 2.6 0.12 2.0 2.2 38.5 3468 2001 0.0754 0.125
1X300 2.8 0.12 2.0 2.3 41.3 4173 2320 0.0601 0.100
1X400 3.0 0.12 2.5 2.4 45.8 5313 2903 0.0470 0.0778
1X500 3.2 0.12 2.5 2.5 49.5 6424 3418 0.0366 0.0605
1X630 3.2 0.12 2.5 2.6 53.6 7932 4049 0.0283 0.0469
YJV32/YJLV32 3 CORE 3.6/6KV   N2XSB(AL)Y,NA2XSB(AL)Y
Nominal cross 
sectional area
Insulation
 thickness
Copper tape
 thickness
Galvanized Steel 
Wire Diameter
Sheath 
thickness
Approximate
 outer diameter
Approx.weight 
kg/km
Max. DC Resistance 
at 20℃ Ω/km
mm2 mm mm mm mm mm CU AL CU AL
3X10 2.5 0.1 2.0 2.1 38.1 2467 2280 1.83 3.08
3X16 2.5 0.1 2.0 2.2 40.0 2787 2492 1.15 1.91
3X25 2.5 0.1 2.0 2.3 42.8 3249 2786 0.727 1.20
3X35 2.5 0.1 2.5 2.4 46.4 4088 3447 0.524 0.868
3X50 2.5 0.1 2.5 2.5 49.0 4751 3877 0.387 0.641
3X70 2.5 0.1 2.5 2.6 53.0 5691 4438 0.268 0.443
3X95 2.5 0.1 2.5 2.7 57.1 6841 5098 0.193 0.320
3X120 2.5 0.1 2.5 2.9 60.3 7815 5609 0.153 0.253
3X150 2.5 0.1 2.5 3.0 64.0 8964 6231 0.124 0.206
3X185 2.5 0.1 2.5 3.1 67.8 10332 6923 0.0991 0.164
3X240 2.6 0.1 3.15 3.3 75.1 13362 8941 0.0754 0.125
3X300 2.8 0.1 3.15 3.5 81.3 15924 10342 0.0601 0.100
3X400 3.0 0.1 3.15 3.8 89.0 19403 12139 0.0470 0.0778
3X500 3.2 0.1 3.15 4.0 97.2 23226 14167 0.0366 0.0605
3X630 3.2 0.1 3.15 4.3 106.2 28356 16613 0.0283 0.0469
YJV32/YJLV32 1 CORE 6/10KV   N2XSB(AL)Y,NA2XSB(AL)Y
Nominal cross
 sectional area
Insulation
 thickness
Copper tape 
thickness
Amored Aluminum 
Wire Diamater
Sheath 
thickness
Approximate 
outer diameter
Approx.weight 
kg/km
Max. DC Resistance 
at 20℃ Ω/km
1X16 3.4 0.12 1.6 1.8 25.2 858 759 1.15 1.91
1X25 3.4 0.12 1.6 1.8 26.4 995 841 0.727 1.20
1X35 3.4 0.12 1.6 1.8 27.4 1121 908 0.524 0.868
1X50 3.4 0.12 1.6 1.9 28.7 1296 1006 0.387 0.641
1X70 3.4 0.12 1.6 1.9 30.4 1558 1141 0.268 0.443
1X95 3.4 0.12 1.6 2.0 32.4 1885 1306 0.193 0.320
1X120 3.4 0.12 2.0 2.1 34.6 2261 1529 0.153 0.253
1X150 3.4 0.12 2.0 2.1 36.1 2579 1672 0.124 0.206
1X185 3.4 0.12 2.0 2.2 38.0 2997 1866 0.0991 0.164
1X240 3.4 0.12 2.0 2.2 40.3 3608 2145 0.0754 0.125
1X300 3.4 0.12 2.0 2.3 42.7 4285 2433 0.0601 0.100
1X400 3.4 0.12 2.5 2.4 46.8 5415 3012 0.0470 0.0778
1X500 3.4 0.12 2.5 2.5 50.1 6473 3481 0.0366 0.0605
1X630 3.4 0.12 2.5 2.7 54.4 8023 4127 0.0283 0.0469
YJV32/YJLV32 3 CORE 6/10KV   N2XSB(AL)Y,NA2XSB(AL)Y
Nominal cross 
sectional area
Insulation
 thickness
Copper tape 
thickness
Galvanized Steel
 Wire Diameter
Sheath 
thickness
Approximate outer 
diameter
Approx.weight 
kg/km
Max. DC Resistance
 at 20℃ Ω/km
mm2 mm mm mm mm mm CU AL CU AL
3X16 3.4 0.1 2.00 2.3 44.6 3266 2970 1.15 1.91
3X25 3.4 0.1 2.50 2.5 48.7 4208 3745 0.727 1.20
3X35 3.4 0.1 2.50 2.6 51.1 4667 4025 0.524 0.868
3X50 3.4 0.1 2.50 2.7 53.9 5325 4451 0.387 0.641
3X70 3.4 0.1 2.50 2.8 58.0 6312 5058 0.268 0.443
3X95 3.4 0.1 2.50 2.9 62.0 7426 5683 0.193 0.320
3X120 3.4 0.1 2.50 3.0 65.0 8437 6231 0.153 0.253
3X150 3.4 0.1 2.50 3.1 68.5 9530 6798 0.124 0.206
3X185 3.4 0.1 2.50 3.2 72.5 11042 7634 0.0991 0.164
3X240 3.4 0.1 3.15 3.5 79.6 14174 9754 0.0754 0.125
3X300 3.4 0.1 3.15 3.6 84.8 16588 11005 0.0601 0.100
3X400 3.4 0.1 3.15 3.9 91.4 19799 12535 0.0470 0.0778
3X500 3.4 0.1 3.15 4.1 98.7 23485 14491 0.0366 0.0605
3X630 3.4 0.1 3.15 4.3 107.5 28585 16905 0.0283 0.0469
YJV32/YJLV32 1 CORE 8.7/15 KV   N2XSB(AL)Y,NA2XSB(AL)Y
Nominal cross 
sectional area
Insulation 
thickness
Copper tape 
thickness
Amored Aluminum 
Wire Diamater
Sheath 
thickness
Approximate 
outer diameter
Approx.weight 
kg/km
Max. DC Resistance
 at 20℃ Ω/km
1X25 4.5 0.12 1.6 1.9 28.8 1130 976 0.727 1.20
1X35 4.5 0.12 1.6 1.9 29.8 1265 1051 0.524 0.868
1X50 4.5 0.12 1.6 1.9 30.9 1431 1141 0.387 0.641
1X70 4.5 0.12 2.0 2.0 33.6 1783 1367 0.268 0.443
1X95 4.5 0.12 2.0 2.1 35.6 2128 1549 0.193 0.320
1X120 4.5 0.12 2.0 2.1 36.8 2412 1679 0.153 0.253
1X150 4.5 0.12 2.0 2.2 38.5 2752 1845 0.124 0.206
1X185 4.5 0.12 2.0 2.2 40.2 3168 2037 0.0991 0.164
1X240 4.5 0.12 2.0 2.3 42.7 3797 2334 0.0754 0.125
1X300 4.5 0.12 2.5 2.4 46.3 4652 2799 0.0601 0.100
1X400 4.5 0.12 2.5 2.5 49.2 5627 3239 0.0470 0.0778
1X500 4.5 0.12 2.5 2.6 52.7 6736 3745 0.0366 0.0605
1X630 4.5 0.12 2.5 2.7 56.6 8254 4358 0.0283 0.0469
YJV32/YJLV32 3 CORE 8.7/15KV   N2XSB(AL)Y,NA2XSB(AL)Y
Nominal cross 
sectional area
Insulation 
thickness
Copper tape 
thickness
Galvanized Steel
 Wire Diameter
Sheath 
thickness
Approximate 
outer diameter
Approx.weight 
kg/km
Max. DC Resistance
 at 20℃ Ω/km
mm2 mm mm mm mm mm CU AL CU AL
3X25 4.5 0.1 2.50 2.6 53.9 4781 4318 0.727 1.20
3X35 4.5 0.1 2.50 2.7 56.3 5254 4613 0.524 0.868
3X50 4.5 0.1 2.50 2.8 59.0 5992 5117 0.387 0.641
3X70 4.5 0.1 2.50 3.0 63.3 6972 5718 0.268 0.443
3X95 4.5 0.1 2.50 3.1 67.4 8157 6414 0.193 0.320
3X120 4.5 0.1 2.50 3.2 70.4 9234 7028 0.153 0.253
3X150 4.5 0.1 3.15 3.3 75.1 11204 8471 0.124 0.206
3X185 4.5 0.1 3.15 3.5 79.4 12849 9440 0.0991 0.164
3X240 4.5 0.1 3.15 3.6 84.8 15116 10695 0.0754 0.125
3X300 4.5 0.1 3.15 3.8 90.1 17432 11850 0.0601 0.100
3X400 4.5 0.1 3.15 4.0 96.5 20799 13535 0.0470 0.0778
3X500 4.5 0.1 3.15 4.2 103.8 24560 15505 0.0366 0.0605
3X630 4.5 0.1 3.15 4.5 112.8 29644 17904 0.0283 0.0469
YJV32/YJLV32 1 CORE 12/20KV   N2XSB(AL)Y,NA2XSB(AL)Y
Nominal cross
 sectional area
Insulation
 thickness
Copper tape
 thickness
Amored Aluminum 
Wire Diamater
Sheath 
thickness
Approximate
 outer diameter
Approx.weight 
kg/km
Max. DC Resistance
 at 20℃ Ω/km
1X35 5.5 0.12 1.6 2.0 32.4 1425 1212 0.524 0.868
1X50 5.5 0.12 2.0 2.0 34.3 1675 1384 0.387 0.641
1X70 5.5 0.12 2.0 2.1 36.2 1969 1553 0.268 0.443
1X95 5.5 0.12 2.0 2.1 38.0 2305 1727 0.193 0.320
1X120 5.5 0.12 2.0 2.2 39.4 2612 1880 0.153 0.253
1X150 5.5 0.12 2.0 2.2 40.9 2941 2034 0.124 0.206
1X185 5.5 0.12 2.0 2.3 42.8 3374 2243 0.0991 0.164
1X240 5.5 0.12 2.5 2.4 46.5 4182 2720 0.0754 0.125
1X300 5.5 0.12 2.5 2.5 48.9 4896 3043 0.0601 0.100
1X400 5.5 0.12 2.5 2.6 52.0 5921 3521 0.0470 0.0778
1X500 5.5 0.12 2.5 2.7 55.3 7008 4019 0.0366 0.0605
1X630 5.5 0.12 2.5 2.8 59.4 8571 4676 0.0283 0.0469
YJV32/YJLV32 3 CORE 12/20KV   N2XSB(AL)Y,NA2XSB(AL)Y
Nominal cross 
sectional area
Insulation 
thickness
Copper tape
 thickness
Galvanized Steel 
Wire Diameter
Sheath 
thickness
Approximate 
outer diameter
Approx.weight 
kg/km
Max. DC Resistance 
at 20℃ Ω/km
mm2 mm mm mm mm mm CU AL CU AL
3X35 5.5 0.1 2.50 2.9 62.0 6040 5398 0.524 0.868
3X50 5.5 0.1 2.50 3.0 64.8 6744 5869 0.387 0.641
3X70 5.5 0.1 2.50 3.1 68.7 7732 6479 0.268 0.443
3X95 5.5 0.1 2.50 3.2 73.0 9022 7280 0.193 0.320
3X120 5.5 0.1 3.15 3.4 77.5 10927 8722 0.153 0.253
3X150 5.5 0.1 3.15 3.5 80.9 12203 9471 0.124 0.206
3X185 5.5 0.1 3.15 3.6 85.0 13737 10328 0.0991 0.164
3X240 5.5 0.1 3.15 3.8 90.5 16081 11661 0.0754 0.125
3X300 5.5 0.1 3.15 3.9 95.7 18548 12965 0.0601 0.100
3X400 5.5 0.1 3.15 4.2 102.3 21972 14708 0.0470 0.0778
3X500 5.5 0.1 3.15 4.4 109.6 25816 16829 0.0366 0.0605
3X630 5.5 0.1 3.15 4.6 118.4 30914 19240 0.0283 0.0469
YJV32/YJLV32 1 CORE 18/30KV   N2XSB(AL)Y,NA2XSB(AL)Y
Nominal cross
 sectional area
Insulation 
thickness
Copper tape 
thickness
Amored Aluminum
 Wire Diamater
Sheath thickness Approximate 
outer diameter
Approx.weight 
kg/km
Max. DC Resistance
 at 20℃ Ω/km
1X50 8.0 0.12 2.0 2.2 39.7 2071 1780 0.387 0.641
1X70 8.0 0.12 2.0 2.3 41.6 2383 1966 0.268 0.443
1X95 8.0 0.12 2.0 2.3 43.4 2725 2146 0.193 0.320
1X120 8.0 0.12 2.5 2.4 46.0 3212 2479 0.153 0.253
1X150 8.0 0.12 2.5 2.5 47.7 3586 2679 0.124 0.206
1X185 8.0 0.12 2.5 2.5 49.4 4026 2894 0.0991 0.164
1X240 8.0 0.12 2.5 2.6 52.1 4727 3266 0.0754 0.125
1X300 8.0 0.12 2.5 2.7 54.5 5449 3597 0.0601 0.100
1X400 8.0 0.12 2.5 2.8 57.6 6504 4105 0.0470 0.0778
1X500 8.0 0.12 2.5 2.9 60.9 7635 4634 0.0366 0.0605
1X630 8.0 0.12 2.5 3.0 65.0 9222 5343 0.0283 0.0469
YJV32/YJLV32 3 CORE 18/30KV   N2XSB(AL)Y,NA2XSB(AL)Y
Nominal cross 
sectional area
Insulation 
thickness
Copper tape 
thickness
Galvanized Steel 
Wire Diameter
Sheath 
thickness
Approximate
 outer diameter
Approx.weight 
kg/km
Max. DC Resistance
 at 20℃ Ω/km
mm2 mm mm mm mm mm CU AL CU AL
3X50 8.0 0.1 3.15 3.4 78.1 9467 8593 0.387 0.641
3X70 8.0 0.1 3.15 3.5 82.2 10540 9286 0.268 0.443
3X95 8.0 0.1 3.15 3.7 86.5 11963 10221 0.193 0.320
3X120 8.0 0.1 3.15 3.8 89.5 13090 10884 0.153 0.253
3X150 8.0 0.1 3.15 3.9 92.9 14400 11667 0.124 0.206
3X185 8.0 0.1 3.15 4.0 97.0 15993 12449 0.0991 0.164
3X240 8.0 0.1 3.15 4.2 102.5 18436 14016 0.0754 0.125
3X300 8.0 0.1 3.15 4.3 107.7 20974 15392 0.0601 0.100
3X400 8.0 0.1 3.15 4.6 114.3 24441 17177 0.0470 0.0778
3X500 8.0 0.1 3.15 4.8 121.6 28391 19350 0.0366 0.0605
3X630 8.0 0.1 3.15 5.0 130.4 33618 21886 0.0283 0.0469

*Describe Your Buying Requirements in Detail